Nitriding - high quality surface hardness

We offer the widest range of Nitriding in the UK. Plasma Nitriding process hardens stainless steel and titanium alloys. A very high degree of control of the case depth and compound layer is achieved by this form of Nitriding. Extensive facilities, which are located in Telford and Birmingham, provide coverage to the whole of the UK.

Both hot wall pulse power technology and cold wall DC power technology is available. Fully computerised, this non-polluting technology provides excellent reproducibility and quality of the case depth and compound layer. Technical experts will recommend the correct choice of process for a particular material / application.

 
 
 
Make contact with our sales co-ordinator

For Technical or Sales enquiries:


peter.jones@aalberts-st-heat.co.uk


 
 
 
Nitriding is another form of surface hardening of steels. It is a thermochemical process in a nitrogen-releasing environment. In this atmosphere the material is heated to a temperature between 475 and 550°C. The material is then held at this temperature for a certain time. This time can vary from a few minutes up to 120 hours. Eventually, the material is cooled down.

Process characteristics:
  • Low temperature - from 475 C to 550 C
  • Environmentally friendly (compared to heavy alternatives - chrome plating)
  • Applied to the depth required - determined by the time in process
  • Component remains clean - fully finished components are usually processed
We can help you work out the best way to progress -
       
talk with our specialists today.
 
 
 
 
 
 
specialised nitriding, nitro-carburising & carbo-nitriding treatments
 
 
 

We constantly seek to improve, and will value your feedback: especially if you have used one of our plants: click on the link

surveymonkey 


Aalberts Surface Technologies Heat Ltd | Disclaimer

Registered Address.: Aalberts Surface Technologies Heat Ltd, Blackhorse Road, Letchworth. SG6 1HD 

Tel: 01462 472147